Isopropyl Alcohol

Product SKU: IPA20

Isopropyl Alcohol as a solvent it is suitable to dissolve most resin systems including acrylic, epoxy, polyvinyl butyral, cellulose and some of the essential oils. It will dissolve most polymer systems that are alcohol soluble.

$150.00

Each
Characteristics
Solvent
Appearance
Clear Liquid
Solubility
Miscible with water
Category:

Product Information

Isopropyl Alcohol also known as Isopropanol or IPA is a colourless liquid with a characteristic alcoholic odour. It is completely miscible with most solvents, including water. It is a versatile solvent since it can be used as a cleaner solvent and as a solvent to dissolve most resins. Isopropyl Alcohol as a cleaner is highly effective at cleaning a variety of substrates ranging from normal metal surfaces to very sensitive substrates used in electronics field including computer screen, plastics, rubbers, seals, cables, fiber optics, keypads, circuit boards and general electrical equipment. It cleans nicely leaving no residues behind. Since it is also anhydrous (without water) means it scavenges water off surfaces which helps to dry surfaces thoroughly.

Specific Gravity (Kg/L): 0.79
Boiling Point (ºC): 82.3
Freezing Point (ºC): – 89
Vapour Pressure (Kpa): 4.41
Vapour Density (Air = 1): 1.1
Flammability Limit (%): 2 – 13
Autoignition Temperature (ºC): 425
Flash Point (ºC): 12
Dielectric Constant: 18.3
Evaporation Rate:
(n- Butyl Acetate = 1): 2.9

Directions for Use

Due to wide variance in the types and quality of materials to be cleaned it is always advisable to assess the suitability of the product by conducting a small test on an inconspicuous area before conducting large scale applications. Ensure that all electrical equipment is switched off before cleaning. Apply some Isopropyl Alcohol on a rag and wipe onto the surface to be cleaned. Repeat if necessary, until all of the contaminants are removed. Allow solvent to evaporate completely before operating the equipment. Isopropyl Alcohol is hygroscopic which means it can absorb moisture from air therefore recap the container immediately after use to avoid moisture absorption.

Safety Guidelines

Wear suitable protective clothing, gloves and eye / face protection when using this product. Avoid breathing of vapour and mist. Provide adequate ventilation when using in confined spaces. Avoid contact with eyes and skin.

Refer to MSDS for full list of safety and protective measures. Highly flammable, do not use near fire or open flame. Store in a cool place and out of direct path of the sun. Keep Out Of Reach Of Children. If swallowed seek medical advice immediately or contact the Poisons Information Center on 13 11 26. Do not allow to enter drains or watercourses. Spills and leaks can be contained with absorbent material such as sand, earth or saw dust. Dispose of waste products thoughtfully or through Chemical Waste Disposal Authority. Material Safety Data Sheet is available upon request.
When stored as specified the product has shelf life of at least five (5) years.

Mask
Safety Glasses
Apron
Gloves
Non - Flammable
False
Dangerous for Transport
N/A
Non – Hazardous
N/A
Non – Toxic
N/A
Non – Acidic
N/A
Non-Petroleum Hydrocarbon
N/A
Biodegradable Quick break Procedures
N/A

Shipping and Freight

  1. Collect from our Auto Shield warehouse at 6 Hod Way, Malaga, Perth, Western Australia 6090, Australia
  2. For orders over $150 get FREE shipping to the Perth metro area
  3. Please call 08 9248 5502 (AWST) for freight outside of Perth metro

Refunds Policy

This Refunds Policy applies to all purchases from the use of Auto Shield Group’s Website.

Auto Shield Group is located at 6 Hod Way, Malaga, Perth, Western Australia 6090, Australia

By accessing this website we assume you accept these terms and conditions in full. Do not continue to use Auto Shield Group’s website
if you do not accept all of the terms and conditions stated on this page.

​At Auto Shield we are justly proud of our own products and the many top name brands that we represent.

​As such we have no hesitation in offering a full refund if any of our products do not provide the performance as described.

We simply ask that we be notified promptly of any concerns, so we may ensure correct product usage.

We would then ask for the swift return of the remaining product so we may investigate to determine if there is

any performance / formula / application / storage / packaging / distribution issues that need to be addressed.

Please call us directly should you ever have any concerns with any of our products and you can be assured of our immediate attention.

Safety Data Sheets

Request Safety Data Sheet (SDS)

Access important product safety and handling information with ease. Simply fill in your details to request the relevant SDS sheet, and our team will promptly deliver it straight to your inbox for your reference and compliance needs.

Name
Checkboxes

Related Products

Car wash detailing station

Ready to Elevate Your Car Care?

Choose high-performance protection and detailing products crafted for lasting results. Speak with Auto Shield Group today and find the right solution for your vehicle.

What do our customers say?

Trusted Brands

Get in Touch with Auto Shield Group

Have questions or need expert advice? Our team is ready to help with product information, support, and tailored car care solutions.

Phone
Call Us

08 9248 5502

Email
Email Us

admin@autoshield.com.au

Address
Location

6 Hod Way, Malaga
Western Australia 6090